Development and validation of a rapid and sensitive assay for the determination of anisodamine in 50 μL of beagle dog plasma by LC–MS/MS

A simple, rapid, high‐throughput, and highly sensitive LC–MS/MS was developed to determine anisodamine in a small volume (50 μL) of beagle dog plasma using atropine sulfate as the internal standard. The analyte and internal standard were isolated from 50 μL plasma samples after a one‐step protein precipitation using Sirocco 96‐well protein precipitation filtration plates. The separation was accomplished on a Hanbon Hedera CN column (100 × 4.6 mm, 5 μm) and the run time was 4 min. A Micromass Quatro Ultima mass spectrometer equipped with an ESI source was operated in the multiple reaction monitoring mode with the precursor‐to‐product ion transitions m/z 306.0→140.0 (anisodamine) and 290.0→123.9 (atropine) used for quantitation. The method was sensitive with a low LOQ of 0.05 ng/mL, and good linearity in the range 0.05–50 ng/mL for anisodamine (r² ≥ 0.995). All the validation data, such as accuracy, intra‐ and interrun precision, were within the required limits. The method was successfully applied to the pharmacokinetic study of anisodamine hydrochloride injection in beagle dogs.     

Use of neutral capillaries for the enantioseparation of N‐benzoylated amino acids by capillary electrophoresis with bromobalhimycin as chiral selector

In this study, the partial filling technique on both polycationic polymer hexadimethrine bromide (HDB) modified capillary and eCAP neutral capillary were systematically compared in order to enhance the enantioseparation ability of bromobalhimycin as CE additive. The separation conditions, such as pH, the plug length, and the concentration of bromobalhimycin, etc., were optimized in order to obtain satisfactory separations. As expected, for all tested 28 N‐benzoylated amino acids, up to five times higher enantioresolutions were obtained on the eCAP neutral capillary compared to that on the polycationic polymer hexadimethrine bromide modified capillary. Moreover, 26 of 28 tested racemic compounds were almost baseline‐ resolved without observing any interference from the front of the plug of bromobalhimycin. Although the limitation of longer running time on the neutral capillary, it allows the use of higher content of bromobalhimycin in the running buffer without any interference on the detection of analytes when enantioseparations are more difficult to obtain.     

Preparation and evaluation of a novel molecularly imprinted SPE monolithic capillary column for the determination of auramine O in shrimp

A novel method combining molecular imprinting and SPE was developed in a capillary column for the determination of auramine O in shrimp. The capillary monolithic column was prepared by UV‐initiated in situ polymerization, using auramine O as template and methacrylic acid and ethylene dimethacrylate as functional monomer and cross‐linker, respectively. The properties of the prepared capillary monolithic column were investigated under the optimized conditions coupled with HPLC, and then the morphologies of the inner polymers were characterized by SEM. The calibration curve was expressed as A = 103C + 19.8 (r = 0.9992) with a linear range of 0.25–25.0 μg/mL, and the recoveries of auramine O at different concentrations in shrimp ranged from 90.5 to 92.4% with RSDs ranging from 2.1 to 4.4%. The capacities of the molecularly imprinted polymer and nonimprinted polymer columns were 0.722 and 0.147 μg/mg, respectively, and the LOD (S/N = 3) of auramine O in shrimp was 17.85 μg/kg. Under the selected conditions, the enrichment factors obtained were higher than 70‐fold. The results indicate that the prepared molecularly imprinted capillary monolithic column was reliable and applicable to the analysis of auramine O in shrimp.     

Supramolecular optical sensor arrays for on-site analytical devices

Supramolecular optical chemosensors are useful tools in analytical chemistry for the visualization of molecular recognition information. One advantage is that they can be utilized for array systems to detect multiple analytes. However, chemosensor arrays have been evaluated mainly in the solution phase, which limits a wide range of practical applications. Thus, appropriate solid support materials such as polymer gels and papers are required to broaden the scope of the application of chemosensors as on-site analytical tools. In this review, we summarize the actual approaches for the fabrication of solid-state chemosensor arrays combined with powerful data processing techniques and portable digital recorders for real-world applications.     

Recent advances in gold-complex and chiral organocatalyst cooperative catalysis for asymmetric alkyne functionalization

Homogeneous gold catalysis has demonstrated the preponderant capability of realizing a broad range of synthetically versatile alkyne functionalization over the last two decades. Though catalytic asymmetric alkyne transformation has focused on the principle of using gold catalysts either associated with chiral phosphine ligand or combined with chiral counterion, a variety of breakthroughs have been reported with the application of gold-complex and chiral organocatalyst cooperative catalysis strategy, which could enable the challenging transformations that cannot be realized by mono-catalysis with excellent stereoselectivity. This review will cover two general protocols in this field, including relay catalysis and synergistic catalysis, with emphasis on the detailed cooperative catalysts models to illustrate the roles of the two catalysts and highlight the potential synthetic opportunities offered by asymmetric cooperative catalysis.     

微乳液法制备介孔碳材料

介孔碳材料因具有高比表面积,规则的孔隙结构,低密度,良好的生物相容性及导电性,被广泛应用于催化、能量储存及转化、吸附分离和药物递送等领域。微乳液法具有制备工艺简便、环境友好、可大规模生产及产物结构可控性强等突出优势,在制备孔隙结构可控和特殊形态介孔碳方面取得突破性的进展。本文首先着重分析了微乳液法制备介孔碳的反应机理,包括微乳液诱导协同组装机制、乳液溶胀效应和微流控液滴技术。其次,进一步探讨了控制介孔碳材料孔隙形态、外部形貌及内部结构的影响因素。最后,对新型介孔碳材料在能源储存与转化、催化、吸附以及药物递送领域的应用进行了归纳,并对未来的发展提出了展望。     

Chemiluminescence immunoassay for cardiac troponin T by using silver nanoparticles functionalized with hemin/G-quadruplex DNAzyme on a glass chip array

The authors describe an array for chemiluminescence (CL) based determination of cardiac troponin T (cTnT), an important cardiovascular disease marker. The tracing tag consists of silver nanoparticles (AgNPs) loaded with guanine-rich DNA sequences and detection antibody in a high numerical ratio. The loaded AgNPs were then reacted with hemin to form a hemin/G-quadruplex DNAzyme. A disposable immunosensor array was fabricated by immobilizing capture antibody on corresponding sensing sites on a glass chip. Once a sandwich immunocomplex is formed on the array, the tracing tag catalyzes the CL reaction of the luminol-p-iodophenol and H₂O₂ system to produce a CL signal, which is collected by a CCD camera. An intuitive CL image is obtained containing all of the spots on the array. Under optimal conditions, the method shows a wide linear range over 4 orders of magnitude (from 0.003 to 270 ng·L^?1), a detection limit down to 84 fg·L^?1, and a throughput as high as 44 tests·h^?1. The results obtained with serum samples are in acceptable agreement with reference values. The AgNP-based tracing tag as well as the immunoassay method shows a promising potential for point-of-care testing for the early clinical diagnosis of cardiovascular disease.

Open image in new window

Graphical abstract Schematic presentation of silver nanoparticles (AgNPs) functionalized with hemin/G-quadruplex DNAzyme for highly sensitive chemiluminescence (CL) immunoassay of cardiac troponin T (cTnT) on a glass chip array.

     

Molecular dynamics simulation of self-diffusion coefficients for several alkanols

The transfer properties and microscopic structures of methanol, ethanol, 1-propanol, 2-propanol, and 1-pentanol in the temperature range from 290 to 450 K and pressure range from 0.1 to 200 MPa were studied by molecular dynamics (MD) simulation through the calculation of the self-diffusion coefficients, velocity autocorrelation functions (VACF), and radial distribution function (RDF). The calculated self-diffusion coefficients conform to the experimental values on the whole, and the temperature has greater influence, which weaken with the increase of the carbon chain, on self-diffusion coefficient than pressure. The factors affecting self-diffusion coefficients were also analyzed from micro perspective by calculation of VACF and RDF, which is helpful to understand the relationship between microscopic structures of fluid and its transfer properties. This work not only provides a reliable simulation method for transfer properties of alkanols, but also provides the prediction data for design and development of chemical processes.     

Facile radiosynthesis of <Superscript>18</Superscript>F-labeled β-glutamic acid as a new PET tracer for imaging lung cancer

In this paper, N-(2-[¹⁸F]fluoropropionyl)-β-glutamic acid 8 ([¹⁸F]FP-β-Glu), a new N-substituted ¹⁸F-labeled amino acid tracer, was synthesized from the precursor 4 (diethyl 3-(2-bromopropanamido)pentanedioate) via a two-step reaction on the modified FDG synthesizer. The radiochemical yield was 20 ± 5% (n = 10, decay-corrected) from [¹⁸F]fluoride within 40 min, the radiochemical purity was 98%. Moreover, microPET studies showed that [¹⁸F]FP-β-Glu 8 exhibited rapid tumor uptake and good tumor-to-lung ratio in SPC-A-1 tumor-bearing mice. A high accumulation of radioactivity was found in the kidneys and bladder, which suggested that the tracer was mainly eliminated through the urinary system.